Warning: Before you begin ...
1) First of all, please make sure you really have to update: in MENU -> SYSTEM -> INFORMATION check that the software version is different from 268074.01115.1
2) We recommend that you temporarily connect the decoder to your TV via SCART cable to be sure to view the status of the update, you can reconnect the HDMI cable at the end of the procedure.
3) In order to proceed, you need a USB flash drive
Update procedure
1) Download the software update
2) Unzip the archive and copy "MTC_MSD7828_DH2836.AP" into the root folder of your USB flash drive
3) Plug the pendrive into the TS6511HD
4) Select the .AP file from USB MENU -> Multimedia -> Music and press OK
5) Wait for the start and completion of the installation. Warning! Do not unplug the pendrive or power off the receiver before the progress bar has reached 100%, risk of irreversible block of the receiver.
6) Restart the receiver by disconnecting and reconnecting the power supply
7) Unplug the USB pendrive
8) Check that the software is properly installed by verifying the version reported on MENU -> SYSTEM -> INFORMATION: it must match 268074.01115.1
9) Perform a reset by MENU -> SYSTEM -> RESET DEFAULT INFORMATION. The standard PIN code is 000000.
Caution
Please accurately follow these instructions, to prevent the decay of the product warranty.
Do not remove the USB drive during software installation.
Do not turn off the power supply during the installation of the decoder.