Blister pack
Blister packed accessories
Universal 1 Output Converter
The universal 1 output converter for an analog or digital satellite receiver.
Universal 2 Output Converter
The universal 2 output converter for 1 or 2 analog or digital satellite receivers completely independently.
Universal 4 Output Converter
The universal 4 output converter for 1 to 4 analog or digital satellite receivers completely independently.
Complete Dual-Feed Kit
This kit will allow you to extend your analog or digital system to receive 2 satellites that are 6° apart, offcentering both of them from the focal point of the aerial (e.g.: Hot Bird 13° and + Astra 19° E). The KIT INCLUDES: Universal 1 Output Converter, Dual-Feed 6° support compatible will all TELE System 80-85 cm aerials, TELE System DiSEqC switch with 2 Inputs 1 Output.
6° Dual-Feed Support
The stationary Dual-Feed 6° support will allow you to extend your analog or digital system to receive 2 satellites that are 6° apart offcentering both of them from the focal point of the aerial (e.g. Hot Bird 13° and + Astra 19° E). N.B.: the system is compatible with all TELE System 80 and 85 cm aerials.
Adjustable DualFeed Support
The adjustable Dual-Feed support will allow you to extend your analog or digital system to receive 2 satellites that are 6° apart offcentering both of them keeping the first converter on the focal point of the aerial (e.g. Hot Bird 13° and + Astra 19° E). N.B.: compatible with all TELE System 80, 85 and 100 cm aerials.
DiSEqC switch with 2 inputs 1 output
TELE System DiSEqC Switch will switch 2 converters by digital codes generated by your analog or digital satellite receiver via the coaxial cable (e.g.: Hot Bird + Astra). Technical characteristics: low attenuation loss, high separation, cable glands, post and straps, also suitable for outdoor use.
Amplifier
The terrestrial-satellite line amplifier will boost the signal from an aerial where there are long stretches of cable or weak signals.
Satellite Terrestrial Mixer
The Satellite Terrestrial mixer will mix the signals from a parabolic dish and a terrestrial aerial so as to be able to use just one downlead coaxial cable. To unmix the signal another MIX-DEMIX in reverse mode has to be installed.
VHF AVM70V Audio/Video modulator
This is the ideal solution for converting analog or digital receiver AUDIO and VIDEO signals into RF and distribute them to all the televisions in your home by the existing TV aerial. It is also perfectly compatible for distributing signals from VCR, DVD, video cameras etc. The simple installation, with a special cable to help the connection to A/V systems makes it easy to connect to any existing aerial system, low attenuation loss. Output frequency: 111-253 MHz adjustable.
Satellite Finder Signal Meter
This instrument is used to direct a satellite aerial. By using the meter, potentiometer and the variation in tone the dish can be precisely directed towards a satellite. An amplifier can be installed in the circuit to compensate any signal losses. It is pre-wired for connection with the converter.
20m coaxial cable
Coil of 75 Ohm low attenuation coaxial cable. Outside diameter 6.7 mm. Red annealed copper inner core. PVC outer sheath. Complete with F plugs.
F connector
Female F-F barrel compatible with 6.7 mm male F plug.
6.7mm screw-on F plugs
Male F connector compatible with 75 Ohm cables having 6.7 mm outside diameter.
2m Tv cable
Male/male IEC connector
2m Tv cable
Male/female IEC connector
2m Tv-Sat cable
Male/male F connector
F connector with flat cable
F connector with flat cable for passing under a window.
2m Dual Link DVI cable
2mt Dual Link DVI Cable.